700W Portable Power Station 576Wh LiFePO4 with 10ms EPS Backup for Router and Lights, Portable Solar Generator for Apartment Blackout

Basic Properties
Place of Origin: Guangdong, China
Brand Name: SOUOP
Certification: CE FCC RoHS PSE UN38.3
Model Number: PPS-P700L
Trading Properties
Minimum Order Quantity: 1 piece
Payment Terms: T/T,L/C,Western Union
Supply Ability: 2000 pieces per Month
Specifications
Battery Capacity: 576Wh (19.2V/30Ah) Battery Type: LiFePO4
Model No.: PPS-P700L AC Output: 120V 6A Max 700W Max 50Hz/60Hz Or 230V 3A Max 700W Max 50Hz/60Hz
Off-grid Output Peak Power: 1200W AC Input: 90V-140V 3.4A Max 400W Max Or 190V-250V 1.6A Max 400W Max
Solar Input: 12V-35V MPPT: 15V-35V 12A Max 240W Max 12V DC Output: 12.8V / 10A
USB-C2 Output: 5V3A; 9V3A; 12V3A; 15V3A; 20V5A; 28V5A, 140W Max USB-C1 Output: 5V3A; 9V2A; 12V1.5A, 18W Max
USB-A Output: 5V3A; 9V2A; 12V1.5A, 18W Max AC Outlets: EU / US / UN / JP / BR / UK / AU
Bypass Mode: 120V 960W; 230V 990W (EPS: <=10ms) Dimensions: 468 X 293.7 X 295.6mm
Net Weight: Approx. 13.89lb (6.3kg) Working Temperature: 32F-104F (0C-40C)
Storage Temperature: -4F-140F (-20C-60C) Warranty: 3 Years
High Light:

Home Blackout Backup Power

,

10ms EPS Transfer Station

,

Router And Lights Backup

Product Description
Apartment Blackout Backup: Closing the Power Gap

Most apartment blackouts last minutes, not days. The real problem is not total energy capacity — it is the gap: the router drops, the fridge compressor stalls, the boiler control board resets. The PPS-P700L is built for that gap. Bypass mode carries the load from the wall while grid power is present, and when the supply disappears the unit switches to inverter output in under 10ms, so connected equipment never sees the interruption.

PPS-P700L portable power station beside a sofa powering a router and floor lamp in an apartment
PPS-P700L providing seamless backup power to a router and floor lamp in a living room.
What 576Wh Protects in a Flat

A fibre router and ONT draw about 15W together. A floor lamp with an LED bulb adds 9W, a phone charger 10W, and a laptop 65W. Running that set for six hours costs roughly 320Wh, which leaves half the pack for a second evening or for the fridge when the outage runs into the next day. An air fryer or a microwave will not run on 700W for long, and the unit does not pretend otherwise: it is a continuity device, not a whole-home inverter.

Switchover, Pass-Through and Recharge
  • EPS transfer under 10ms keeps a desktop PC, a NAS and a router alive without a reboot.
  • In bypass mode the station passes 120V 960W or 230V 990W straight through while topping the pack up.
  • Mains recharge runs at 400W, so a full pack returns in about 1.5 hours once the grid is back.
  • Working range 0–40°C suits a hallway cupboard or a kitchen counter; storage runs from -20°C to 60°C.
Kept Where the Family Can Reach It

At 6.3kg the unit hangs on a wall bracket in the utility cupboard or sits beside the router shelf. The 12.8V 10A DC socket also runs a 12V LED strip during an evening outage, and the USB-A and USB-C ports take over phone charging so the family does not hunt for power banks.

PPS-P700L portable power station with USB and DC ports ready for household device charging
Silent, Fume-Free, Safe Indoors

There is no exhaust and no fuel, so the unit can run in a corridor or a bedroom without ventilation planning. LiFePO4 chemistry holds its voltage under load and does not thermally run away in the way older chemistries can, and the BMS separates over-charge, over-discharge, short circuit and temperature protection.

Built and Tested In-House

Household backup depends on the transfer and inverter stages behaving identically on every unit, so the PPS-P700L is manufactured in the SOUOP facility in Shenzhen rather than assembled from bought-in modules. Three SMT lines build the boards in-house, forty-five burn-in chambers and eight ATE/AOI stations verify them, and twelve production lines maintain a 100,000-unit monthly capacity. The company has operated since 2008 with six hundred staff and exports ninety to one hundred percent of production. OEM/ODM projects can adjust capacity, output power, voltage versions, outlet types and packaging for a specific market.

SOUOP factory production line images for the PPS-P700L portable power station
In-house SMT, burn-in and ATE/AOI verification at the SOUOP Shenzhen facility.