6000W Portable Solar Power Station 4608Wh Portable Home Power Station 7200W Boost Mode HP6000 V2

HP6000 V2 is the large-frame model in the range: a 4608Wh LiFePO4 battery bank, a 6000W pure sine wave inverter and a bypass circuit in a single 633 x 412 x 427mm cabinet weighing about 50kg. It is sized for the loads a house or a small shop actually runs during an outage — a fridge, a freezer, lighting, a sump pump, a POS system and the network rack — and it hands those loads over automatically through the EPS bypass path instead of dropping them.

Built for the loads a building really has

1. Enough stored energy to matter. At 4608Wh the bank covers a working day of household essentials or a full shift at a small retail counter, and the LiFePO4 chemistry gives a long service life without the maintenance of lead acid.

2. Headroom for motor starts. The inverter holds 6000W continuously, boosts to 7200W for heavier loads, and absorbs 9000W of surge, so compressors, pumps and tools start without tripping the unit.

3. Transfer without a reboot. The bypass path carries the load and switches over in roughly 20 milliseconds, which keeps computers, routers, cameras and tills running through the gap.

4. Inputs that fit the building. A 1800W or 3600W AC input depending on voltage, a 2100W solar input on XT60 and a 12V car input cover mains, roof array and vehicle charging in the same unit.

HP6000 V2 ships on a wooden frame with an export carton, carries a 3 year warranty, and is available in 120V and 230V builds with OEM branding for distributors.

Factory and quality behind every HP6000 V2

SOUOP has manufactured portable energy storage since 2008 at its Shenzhen plant, where battery pack assembly, BMS development, inverter production and final testing sit under one roof. The company employs between 101 and 500 people and exports 80 to 90 percent of its output to Europe and North America.

The HP6000 V2 line is built to a documented quality system: ISO 9001 process control, BSCI social compliance, and product certification covering CE, RoHS, UKCA, SAA, UL2743, FCC and PSE. Every unit is charged, discharged, load tested and insulation checked before packing, and each battery pack carries a traceable serial number.

Because the enclosure, the inverter and the battery are engineered in house, voltage variants, outlet standards, cabinet finish and branding can all be adapted on OEM and ODM orders. The standard production lead time is 15 to 25 working days after payment, with engineering support available for distributors specifying a new market variant.