2048Wh Portable LiFePO4 Power Station 2100W PV Input 1600W AC Recharge S2 Solar Generator

S2 is wired for people who generate their own electricity. The solar input accepts 12V to 150V strings up to 2100W and tracks the maximum power point continuously, so a roof array, a folding panel set or a vehicle-mounted panel all feed the same 2048Wh LiFePO4 bank. When the weather closes in, a 1600W AC charger returns the pack to working capacity from a wall socket in about an hour and a half, and both sources can run at the same time when the load is heavy.

Engineered around the panel, not the plug

1. Wide PV window. Strings from 12V to 150V at up to 15A are accepted, which covers compact folding panels as well as series-connected roof arrays of 2100W.

2. MPPT, not PWM. The maximum power point tracker keeps harvesting when panels are hot, shaded or partly cloudy, recovering energy that a simple controller throws away.

3. AC and PV together. During a long outage the wall charger and the array can charge the bank at the same time, shortening the wait before the reserve is full again.

4. Storage that lasts. LiFePO4 chemistry is rated for roughly 4000 cycles, and the 51.2V architecture keeps current low and conversion losses small.

5. Know the harvest. The app logs input power and state of charge, so owners can see whether a panel is underperforming before it becomes a problem.

The station ships in a colour box with an export carton, a two year warranty, and OEM or ODM branding for solar distributors and off-grid installers.

Factory and quality behind every S2

SOUOP has manufactured portable energy storage since 2008 from its base in Shenzhen, Guangdong. The plant runs its own BMS development, pack assembly and inverter lines, employs between 101 and 500 people, and ships 80 to 90 percent of output to Europe and North America. Every unit passes a full charge and discharge test, an aging cycle and a high voltage insulation check before it is packed.

Quality is audited rather than claimed. The factory holds ISO 9001 quality management, BSCI social compliance and CE, RoHS certification for the S2 series, with incoming cell sorting, in-process inspection and a traceable serial number on every battery pack. Distributors receive the test record for their production batch on request.

Because we control the pack, the inverter and the enclosure in one place, changes move quickly: different outlet standards, cabinet colours, logo printing and app branding can all be handled on OEM and ODM orders, with typical lead time of 7 to 15 working days after payment.