PPS-P350L 288Wh LiFePO4 Portable Power Station Quiet CPAP Backup For Night Therapy
| Application: | CPAP And Night Therapy Backup | Runtime at 40W: | About 7 Hours |
| Runtime at 60W: | About 4.5 Hours | Noise Level: | Below Room Ambience At 1 M |
| AC Output: | 120V 350W Max / 230V 350W Max, 50/60Hz, 600W Peak | Battery Capacity: | 288Wh (19.2V / 15Ah) |
| Battery Type: | LiFePO4 | USB-C2 Output: | 140W Max (5V3A / 9V3A / 12V3A / 15V3A / 20V5A / 28V5A) |
| USB-C1 Output: | 18W Max | USB-A Output: | 18W Max |
| 12V Car Socket: | 12.8V / 10A | AC Input: | 200W Max (90-140V / 190-250V) |
| Solar Input: | 12-35V, MPPT 15-35V, 12A Max, 240W Max | Car Charging Input: | 12-15V, 8A Max |
| Bypass Mode: | 120V 600W / 230V 575W, Transfer <=10ms | Net Weight: | 4.15 Kg |
| Dimensions: | 242.5 X 224.06 X 150.65 Mm | Warranty: | 3 Years |
| High Light: | 288Wh CPAP Backup Battery,Quiet Night Therapy Power Station,LiFePO4 Portable Power Station |
||
PPS-P350L 288Wh LiFePO4 Power Station for CPAP and Night Therapy
A CPAP machine that stops at 3 a.m. is not a minor inconvenience. The PPS-P350L is built around one job: keeping a therapy device, a phone and a bedside lamp alive from bedtime to morning without a generator, a fan or an exhaust.
Inside is a 288Wh LiFePO4 bank rated for 3,500 cycles, paired with a pure sine wave AC output of 350W continuous and 600W peak. Typical therapy devices draw between 30W and 60W, so the pack covers a full night with margin, and the 10 ms bypass mode means the machine can run while the station itself is on mains.
PPS-P350L in a typical use setting
How a night is covered
| Load | Draw | Typical runtime on 288Wh |
|---|---|---|
| CPAP without humidifier | 30-40W | About 7 to 9 hours |
| CPAP with heated humidifier | 50-70W | About 4 to 6 hours |
| CPAP plus phone charging | 40-55W | About 5 to 7 hours |
Quiet by design
There is no fan on the main inverter stage at therapy loads, and the cell chemistry is LiFePO4 rather than a high-voltage NMC pack, so the unit stays stable in a warm bedroom. Noise at 1 m is below normal room ambience. The station can sit on a floor or under a nightstand without disturbing a partner.
PPS-P350L ports and cable layout at the point of use
Charging between nights
- Mains: 0 to 100 percent in about 1.6 hours from a 200W AC input.
- Solar: up to 240W through an MPPT input that accepts 12-35V panels, useful during long outages.
- Car: 12-15V at 8A from a vehicle socket during travel.
Ports at a glance
Two AC outlets (US and EU versions available), 140W USB-C PD for a tablet or laptop, 18W USB-C, 18W USB-A and a 12.8V 10A car socket for a small lamp or a heated travel blanket. The 140W PD port also recharges the station itself from a USB-C charger when no AC is nearby.
Safety and compliance
The pack is UN38.3 tested, carries CE, FCC, RoHS and PSE marks, and the BMS protects against over-charge, over-discharge, short circuit and over-temperature. The EPS transfer of 10 ms keeps a therapy device powered through a grid dip when the station is plugged into mains.
Questions buyers ask
Will it run my specific machine? Send us the wattage on the device label. Anything up to 350W continuous is within range.
Can it be used every night? Yes. LiFePO4 is rated for 3,500 cycles to 80 percent capacity, which is roughly ten years of daily use.
How is it shipped? One piece per SOUOP colour box with foam inserts, 7-15 working days after payment, T/T, L/C, PayPal or Western Union.
Tell us the device model and the number of nights required, and we will confirm the correct pack count and a landed price.