PPS-P350L 350W Portable Power Station 288Wh LiFePO4 Silent Power For Camera Battery Charging
| Application: | Photo And Video Production | USB-C2 PD Output: | 140W Max |
| Runtime at 90W: | About 3 Hours | Fan: | Not Active At Loads Below 200W |
| AC Output: | 120V 350W Max / 230V 350W Max, 50/60Hz, 600W Peak | Battery Capacity: | 288Wh (19.2V / 15Ah) |
| Battery Type: | LiFePO4 | USB-C2 Output: | 140W Max (5V3A / 9V3A / 12V3A / 15V3A / 20V5A / 28V5A) |
| USB-C1 Output: | 18W Max | USB-A Output: | 18W Max |
| 12V Car Socket: | 12.8V / 10A | AC Input: | 200W Max (90-140V / 190-250V) |
| Solar Input: | 12-35V, MPPT 15-35V, 12A Max, 240W Max | Car Charging Input: | 12-15V, 8A Max |
| Bypass Mode: | 120V 600W / 230V 575W, Transfer <=10ms | Net Weight: | 4.15 Kg |
| Dimensions: | 242.5 X 224.06 X 150.65 Mm | Warranty: | 3 Years |
| High Light: | Silent Camera Battery Charging,140W USB-C PD Power Station,288Wh Video Production Power |
||
PPS-P350L Silent Power for Camera Crews and Video Sets
On a set, a generator means noise, fumes and a cable run across the floor. The PPS-P350L gives a small crew a 288Wh LiFePO4 buffer that sits on the equipment table, runs a monitor or an LED panel, and tops up camera batteries through USB-C without anyone raising their voice.
PPS-P350L in a typical use setting
Why 140W USB-C matters here
The second USB-C port delivers up to 140W of PD output, enough for a 99Wh V-mount or NP-F style battery plate charger, a 16 inch laptop, or a monitor that expects 100W. Two more USB ports at 18W each cover a phone, a timecode box or a radio receiver. The AC outlets take the rest: a 100W LED panel, a small audio mixer or a battery charger station.
| On-set load | Power | Runtime on 288Wh |
|---|---|---|
| LED panel at 50 percent | 60W | About 4.5 hours |
| Monitor plus laptop | 90W | About 3 hours |
| Two camera batteries via USB-C | 60-90W | About 3 to 4 hours |
PPS-P350L ports and cable layout at the point of use
Silence and clean power
The output is pure sine wave, so ballasts and camera chargers do not buzz. There is no cooling fan at these loads, which matters when a take is rolling two metres away. Flicker from LED panels is driven by the panel, not the supply, and the station holds a stable 120V or 230V at 50 or 60Hz.
Moving between locations
At 4.15 kg with a moulded carry handle, the unit moves from a car boot to a location in one hand. It recharges from a 12V vehicle socket at 8A between shoots, from a 240W solar panel on a long exterior day, or from mains in about 1.6 hours. A 10 ms EPS bypass keeps the monitor alive if the location loses power and the station is plugged in.
Build and service life
The LiFePO4 cells are rated for 3,500 cycles, and the BMS manages cell balance, temperature and short circuit protection. The enclosure is a sealed cabinet with recessed ports, so dust on location is not pushed into the electronics. Every unit is UN38.3 tested and CE, FCC, RoHS and PSE marked for air freight and EU import.
Buying notes
- MOQ 1 piece, 10,000 pieces per month capacity, 7-15 working days.
- Custom logo and packaging available from 200 pieces.
- Supplied in a SOUOP colour box with foam inserts and an export carton.
Send us your typical load list and shoot length, and we will size the number of packs and quote FOB Shenzhen.