576Wh Silent Output Portable Power Station for Market Stall Food Cart and Portable Solar Generator Use
| Battery Capacity: | 576Wh (19.2V/30Ah) | Battery Type: | LiFePO4 |
| Model No.: | PPS-P700L | AC Output: | 120V 6A Max 700W Max 50Hz/60Hz Or 230V 3A Max 700W Max 50Hz/60Hz |
| Off-grid Output Peak Power: | 1200W | AC Input: | 90V-140V 3.4A Max 400W Max Or 190V-250V 1.6A Max 400W Max |
| Solar Input: | 12V-35V MPPT: 15V-35V 12A Max 240W Max | 12V DC Output: | 12.8V / 10A |
| USB-C2 Output: | 5V3A; 9V3A; 12V3A; 15V3A; 20V5A; 28V5A, 140W Max | USB-C1 Output: | 5V3A; 9V2A; 12V1.5A, 18W Max |
| USB-A Output: | 5V3A; 9V2A; 12V1.5A, 18W Max | AC Outlets: | EU / US / UN / JP / BR / UK / AU |
| Bypass Mode: | 120V 960W; 230V 990W (EPS: <=10ms) | Dimensions: | 468 X 293.7 X 295.6mm |
| Net Weight: | Approx. 13.89lb (6.3kg) | Working Temperature: | 32F-104F (0C-40C) |
| Storage Temperature: | -4F-140F (-20C-60C) | Warranty: | 3 Years |
| High Light: | Silent Market Stall Power,Food Cart Power Station,700W Stall Power Supply |
||
A market stall cannot run a generator: the venue bans fuel, the neighbours complain about noise, and the exhaust sits at ankle height where customers stand. The PPS-P700L replaces that generator with 576Wh of LiFePO4 and 700W of silent AC power. There is no idle draw, no refuelling, and nothing to trip over at the front of the stall.
| Equipment | Draw | Ten Hours |
|---|---|---|
| Card terminal and tablet till | 25W | about 250Wh |
| Two LED spotlights | 30W | about 300Wh |
| Phone and card reader charging | 15W | about 150Wh |
| Bar blender, intermittent | 600W peak, 20 min total | about 200Wh |
The total sits near 900Wh, which is why two units are the normal configuration for a drinks stall and one unit is enough for a dry-goods stand. The 1200W peak absorbs the blender's inrush without shutting the till down, and the pure sine output keeps the card terminal stable.
A 400W mains charge brings the pack back in about 1.5 hours overnight, and the 240W MPPT input lets a solar panel top it up during a slow afternoon. For a two-day event, a second pack swaps in while the first recharges; the units chain from one 12V 10A DC port if a 12V light string needs to stay on during the swap.
At 6.3kg and 468 x 294 x 296mm, the unit goes into the van footwell at close of trade, not onto a trolley. The handle is recessed, the case is wipe-clean, and the outlets face one side so a single cable run serves the whole counter.
- Four AC outlets: till, lights, blender and a spare for a customer's phone.
- USB-C2 at 140W: for a tablet POS or a laptop running the stock sheet.
- USB-A and USB-C1 at 18W: for card readers and phones.
- 12V 10A DC: for festoon lighting or a 12V cooler.
A stall unit is charged and drained every day, so cell matching, connector quality and thermal behaviour decide how long it lasts — and those are controlled in one plant. The PPS-P700L is built in Shenzhen on twelve production lines with three in-house SMT lines, then aged and load-tested on forty-five burn-in systems and inspected at eight ATE/AOI stations before packing.
SOUOP has operated since 2008 with a team of six hundred, exports ninety to one hundred percent of its output to markets including Europe and North America, and offers OEM/ODM configuration of capacity, interfaces, outlet types and packaging.
