700W Portable Power Station 576Wh Portable Solar Generator with 1200W Peak for Jobsite Tool Charging
| Battery Capacity: | 576Wh (19.2V/30Ah) | Battery Type: | LiFePO4 |
| Model No.: | PPS-P700L | AC Output: | 120V 6A Max 700W Max 50Hz/60Hz Or 230V 3A Max 700W Max 50Hz/60Hz |
| Off-grid Output Peak Power: | 1200W | AC Input: | 90V-140V 3.4A Max 400W Max Or 190V-250V 1.6A Max 400W Max |
| Solar Input: | 12V-35V MPPT: 15V-35V 12A Max 240W Max | 12V DC Output: | 12.8V / 10A |
| USB-C2 Output: | 5V3A; 9V3A; 12V3A; 15V3A; 20V5A; 28V5A, 140W Max | USB-C1 Output: | 5V3A; 9V2A; 12V1.5A, 18W Max |
| USB-A Output: | 5V3A; 9V2A; 12V1.5A, 18W Max | AC Outlets: | EU / US / UN / JP / BR / UK / AU |
| Bypass Mode: | 120V 960W; 230V 990W (EPS: <=10ms) | Dimensions: | 468 X 293.7 X 295.6mm |
| Net Weight: | Approx. 13.89lb (6.3kg) | Working Temperature: | 32F-104F (0C-40C) |
| Storage Temperature: | -4F-140F (-20C-60C) | Warranty: | 3 Years |
| High Light: | Jobsite Tool Charging Station,1200W Peak Site Power,Portable Power For Trades |
||
On a fit-out or a service call there is often no socket within reach, and a generator is too much equipment for a two-hour job. The PPS-P700L carries 576Wh to the work face: four AC outlets for chargers and small tools, a 1200W peak for motor starts, and a 12V 10A rail for a work light. One person lifts it out of the van and the job starts.
| Equipment | Draw | Runtime |
|---|---|---|
| 18V dual-bay charger | 120W | About 4 full packs |
| Site radio and work light | 45W | About 11 hours |
| Random orbital sander | 350W | About 1.5 hours |
| Heat gun, low setting | 500W | About 1 hour |
Induction motors and heat guns pull hard at start-up; the 1200W peak covers that inrush so the inverter does not trip at the switch. Continuous output stays at 700W, which is the honest limit for a unit this size.
A 400W mains charge returns the pack in about 1.5 hours, so a lunch break is enough for a second shift. In a van with no mains, the 12–15V 8A car input adds roughly 100W while driving between jobs, and the 240W solar input covers a day on site if a panel is carried.
- 6.3kg with a recessed handle: one person carries it up a scaffold or into a plant room.
- 468 × 294 × 296mm footprint fits a shelf in the van and a gap beside a switchboard.
- Working range 0–40°C covers an unheated shell or a roof in summer.
- Wipe-clean case and recessed outlets survive a site wipe-down.
The BMS balances cells on every full charge and cuts the output before the pack is drained flat, which is what keeps a LiFePO4 pack alive through daily site use. Storage temperature from -20°C to 60°C means the unit can stay in the van over a weekend without damage.
Tools pull surge current rather than steady load, so the output stage and thermal design have to hold up across a whole site season. The PPS-P700L is built where those parts are made: three in-house SMT lines produce the boards, eight ATE/AOI stations inspect them, forty-five burn-in systems age finished units under load, and twelve production lines give a monthly capacity of 100,000 units.
SOUOP has manufactured since 2008 with six hundred staff and exports ninety to one hundred percent of production. OEM/ODM projects can change output power, capacity, interface layout, outlet types and packaging.
