SOUOP S1 Lite 2000W Portable Power Station 1024Wh LiFePO4 Battery Long Cycle Home Backup
| Model: | S1 Lite | Battery Capacity: | 1024Wh (51.2V / 20Ah) |
| Battery Type: | LiFePO4 | AC Output: | 2000W Continuous, 4500W Surge, 100V Or 240V 50/60Hz |
| AC Input: | 1400W Max, 90-250V | Solar Input: | 12-78V MPPT, 800W Max |
| Car Input: | 12-15V, 8A Max | USB-C Output: | 140W PD |
| USB-A Output: | 18W Per Port | 12V Output: | 12V / 10A, 120W |
| EPS Transfer: | 20ms Bypass Mode | Net Weight: | 12.15kg (26.79 Lb) |
| Dimension: | 384 X 232 X 295 Mm | Warranty: | 3 Years |
| High Light: | 1024Wh LiFePO4 Long Cycle,2000W Pure Sine Home Backup,Smart APP Battery Monitor |
||
Battery-first buyers ask a different question than capacity shoppers: what will this pack still hold in year five? The SOUOP S1 Lite answers with a 1024Wh LiFePO4 assembly built for daily cycling, managed by a BMS that balances and derates instead of simply cutting out, and wrapped in a 2000W pure sine wave inverter with 4500W of surge headroom.
Battery performance: chemistry, capacity and what cycling does to it
Inside the case sits a 51.2V / 20Ah LiFePO4 pack. LFP is specified here for three reasons a buyer can actually verify:
- Cycle endurance: thousands of charge cycles to 80% state of health, which is why the unit carries a 3-year warranty rather than the 12 months typical of NMC designs.
- Thermal stability: the olivine cathode does not release oxygen under abuse, so the pack is far harder to push into thermal runaway than a nickel-rich cell.
- Flat voltage curve: chargers and inverters see a stable supply down to the last few percent, so runtime does not collapse at 20%.
| Battery data | S1 Lite |
|---|---|
| Capacity | 1024Wh (51.2V / 20Ah) |
| Chemistry | LiFePO4 |
| Cycle life | Thousands of cycles to 80% SOH |
| Cell monitoring | Multi-point NTC plus active balancing BMS |
How the pack is managed in daily use
Most households run three or four shallow cycles a week and one deep discharge a season. The BMS logs every one of them. Through the SOUOP app you can read state of health, cell-group balance, charge and discharge counters, and the last protection event - data that turns a warranty claim into a documented conversation instead of a guess.
Charging performance
A 1400W AC stage refills the pack to 80% in about 40 minutes and to full in roughly an hour, while an 800W MPPT input accepts 12-78V of solar so a 400W folding panel pair keeps the unit topped up off-grid. A 12V car socket adds 120W on the move. All three paths are managed by the same charge controller, so nothing needs to be reconfigured between them.
Safety performance
Overcharge, over-discharge, overcurrent, short-circuit and over-temperature protection sit alongside a 20ms EPS bypass, so a router or desktop rides through a grid failure without rebooting. The housing is flame retardant, and the unit ships with CE, FCC, RoHS, PSE and UN38.3 documentation per batch.
Portability performance
At 12.15kg and 384 x 232 x 295 mm, the S1 Lite is a one-hand lift for most adults and fits a kitchen cupboard, an RV locker or a car boot floor without blocking the load space. A single top handle is positioned over the centre of gravity, and the fan only spins under sustained high load, so it can sit in a bedroom overnight.
Runtime expectations
A 120W fridge for about 7 hours, a 60W laptop for more than 14 hours, a router plus two lights for two days, a CPAP machine for three nights, or a 1500W kettle for roughly 35 minutes. Surge capacity of 4500W absorbs compressor and pump start-up.
SOUOP: portable energy storage manufactured in Shenzhen since 2008, with battery pack, BMS and inverter assembly under one roof, ISO 9001 and BSCI certified, 10,000+ customers and 80-90% of output exported to Europe and North America.
Ask for a cycle-life and capacity-retention report on a production batch before you place a container order.
