1200W Uninterrupted Power Supply 368.64Wh Battery Backup Keeps Fish Tank Pump Heater Running
| Rated Power: | 1200W Continuous, 2400W Peak | Battery Capacity: | 368.64Wh LiFePO4 (51.2V 7.2Ah) |
| Transfer Time: | 0ms In Online Mode, 10ms In ECO Mode | AC Outlets: | 8 X Type B Sockets (universal Option Available) |
| USB Output: | USB-C 36W, USB-A 18W | AC Input: | 90-280V, 40-70Hz |
| Dimensions: | 380 X 185 X 208 Mm | Net Weight: | 7.45 Kg |
| Cycle Life: | 3500+ Cycles | Warranty: | 3 Years |
| Typical Use: | Aquarium Filter, Air Pump, Heater During Outages | ||
| High Light: | aquarium power outage backup,fish tank pump backup,tank heater battery backup |
||
Fish do not cope with a power cut the way people do. Without the filter and air pump, oxygen drops. Without the heater, the water temperature falls, and in winter that alone can kill a tank overnight. A four-hour outage is enough to cause real losses.
The UPS-P1200L plugs in between the wall socket and your tank equipment. When the power goes out, the filter, air pump and heater keep running on battery. When the power comes back, it recharges by itself.
- Canister or internal filter — usually 10 to 30W.
- Air pump — usually 3 to 8W.
- Heater — 50W to 200W depending on tank size. This is the big one.
- A small LED light, if you want the tank visible.
| Tank setup | Power used | Time on battery |
|---|---|---|
| Filter and air pump only | 25W | about 13 hours |
| Filter, air pump and 50W heater | 75W | about 4.5 hours |
| Filter, air pump and 100W heater | 125W | about 2.6 hours |
| Filter, air pump and 200W heater | 225W | about 1.5 hours |
Heaters switch on and off, so real time is usually longer than these figures. Small tanks with a 50W heater do best.
The unit switches to battery with no gap in online mode (0ms), so the filter motor never stops and never needs to restart. That matters: a filter that stops for a few hours loses the bacteria that keep the water safe, and a restart can push old water back into the tank.
- Plug the unit into the wall socket near the tank. Keep it off the floor and away from splashes.
- Plug the filter and air pump into the outlets on the back first. These matter most.
- Add the heater next. Check the load figure on the screen; keep it well below 1200W.
- Do a test: switch off the wall socket and watch that everything keeps running.
- 368.64Wh LiFePO4 battery, over 3500 cycles, three-year warranty.
- Eight outlets on the back, so filter, pump, heater and light all fit without a power strip.
- Weight is 7.45 kg and the case is 380 x 185 x 208 mm — it sits beside a cabinet without taking much room.
- It accepts 90–280V input, which helps in areas where the voltage drops during peak hours.
Tell us your tank size, heater wattage and filter wattage, and we will tell you exactly how long the backup will last.
Every unit is built and tested in our own factory in Shenzhen, not bought in and relabelled. Before packing, each unit goes through in-house PCBA assembly, burn-in aging and functional testing on 45 burn-in stations plus 8 ATE/AOI systems, so a unit that fails a check does not leave the line. Monthly capacity is 100,000 units.
