1200W Uninterrupted Power Supply 368.64Wh UPS Battery Backup with Quiet Operation for CPAP Machines
| Rated Power: | 1200W Continuous, 2400W Peak | Battery Capacity: | 368.64Wh LiFePO4 (51.2V 7.2Ah) |
| Transfer Time: | 0ms In Online Mode, 10ms In ECO Mode | AC Outlets: | 8 X Type B Sockets (universal Option Available) |
| USB Output: | USB-C 36W, USB-A 18W | AC Input: | 90-280V, 40-70Hz |
| Dimensions: | 380 X 185 X 208 Mm | Net Weight: | 7.45 Kg |
| Cycle Life: | 3500+ Cycles | Warranty: | 3 Years |
| Typical Use: | CPAP And BiPAP Machines At Night | ||
| High Light: | cpap battery backup,breathing machine power backup,overnight cpap power |
||
A CPAP machine that loses power wakes the person wearing it, and for some people it is worse than that: the mask pressure drops, the airway closes, and they wake up struggling for air. Nobody wants to find that out at two in the morning.
The UPS-P1200L sits between the wall socket and the machine. If the power fails, the machine keeps running on battery with no gap at all. It also keeps a phone charging and a lamp on, so the room does not go dark.
| Machine setup | Power used | Time on battery |
|---|---|---|
| CPAP without humidifier | 30W | about 11 hours |
| CPAP with humidifier on low | 50W | about 6.6 hours |
| CPAP with humidifier on high | 80W | about 4 hours |
| BiPAP with humidifier | 95W | about 3.4 hours |
Most people sleep seven hours. Switching the humidifier to low, or off in summer, is usually enough to cover a full night.
The unit has no fan noise at low load, and because it runs the machine from its own output there is no click or relay sound when the power changes over. It is small — 380 × 185 × 208 mm, 7.45 kg — so it goes on the nightstand or under the bed.
- Plug the UPS into the wall, and the CPAP machine into one of the eight outlets.
- Leave the humidifier setting as you normally use it, then check the load figure on the screen.
- Add a small lamp and a phone charger to the USB ports.
- Test it once: switch off the wall socket and confirm the machine keeps running.
- 368.64Wh LiFePO4 battery, more than 3500 cycles, three-year warranty.
- 1200W output with 2400W peak, so the machine starts without tripping.
- Pure sine wave output, which is what medical equipment and their power supplies expect.
- Accepts 90–280V input, useful when the voltage sags in the evening.
This unit is a backup power supply, not a medical device. Check with your equipment supplier that your machine can run from a pure sine wave battery source, and test it before relying on it overnight.
Tell us your machine model and humidifier setting and we will calculate how many nights one charge will cover.
Products are developed and made in house. Our engineering team works on the electrical design, battery pack, and safety checks, and each new model is tested and verified before mass production. Units are then assembled on 12 production lines and checked on 45 burn-in stations and 8 ATE/AOI systems, so the design on paper matches what ships.
