6000W Portable Power Station with 4608Wh LiFePO4 Battery and 2100W MPPT Solar Input Solar Generator for Off Grid
| Model: | HP6000 V2 | Battery Capacity: | 4608Wh (51.2V / 90Ah) |
| Battery Type: | LiFePO4 | AC Output: | 120V/3600W & 240V/6000W, 50/60Hz; 230V 6000W Max, 50/60Hz |
| Boost Mode: | 7200W | Surge Power: | 9000W |
| Bypass Mode: | 2400W / 3600W | AC Charge Input: | 90-140V, 20A Max, 1800W Max / 200-240V, 20A Max, 3600W Max |
| Solar Input (XT60): | 12-175V, MPPT 16-165V, 25A Max, 2100W Max | Car Charge Input: | 12-15V, 8.5A Max |
| Net Weight: | About 50.75 Kg | Dimensions: | 633.57 X 412.52 X 426.96 Mm / 659.1 X 412.52 X 426.96 Mm |
| Storage Temperature: | -20-60C (-4-140F) | Certifications: | CE / RoHS / UKCA / SAA / UL2743 / FCC / PSE |
| Application: | Off Grid Solar | Solar Input: | 2100W MPPT 16-165V |
| Capacity: | Expandable | ||
| High Light: | 2100W MPPT Solar Charging,Expandable LiFePO4 Capacity,Off Grid Cabin Power |
||
The HP6000 V2 is designed to be the battery at the centre of a small off-grid system. Its 2100W MPPT solar input accepts a 12–175V array directly, the 4608Wh LiFePO4 bank stores the harvest, and the 6000W AC output delivers it as ordinary household power.
-
Wide 16–165V MPPT Window
Two or three full-size panels in series connect straight to the XT60 input — no external charge controller, no mismatched voltage. The tracker holds the array at its maximum power point as light and temperature move through the day.
-
2100W Maximum Solar Input
Matches roughly 2,600–2,800W of installed panel capacity in real-world derating, which is enough to refill the 4608Wh bank on a good day while carrying daytime loads.
-
4608Wh LiFePO4 Storage
Deep-cycle tolerant, flat discharge curve, more than 3,500 cycles. Capacity stays predictable in daily cycling service.
-
Expandable Capacity
Add battery capacity as the load grows instead of replacing the whole system — the platform is built to scale from a cabin to a small dwelling.
-
Grid or Generator Fallback
1800W (100–120V) and 3600W (200–240V) AC charging covers the cloudy stretch, and the 12–15V car input covers a vehicle-based setup.
| Battery Capacity | 4608Wh (51.2V / 90Ah) |
|---|---|
| Battery Type | LiFePO4 |
| Model | HP6000 V2 |
| AC Output | 120V/3600W & 240V/6000W, 50/60Hz; 230V 6000W Max, 50/60Hz |
| Boost Mode | 7200W |
| Surge Power | 9000W |
| Bypass Mode | 2400W / 3600W |
| AC Charge Input | 90–140V, 20A Max, 1800W Max / 200–240V, 20A Max, 3600W Max |
| Solar Input (XT60) | 12–175V, MPPT 16–165V, 25A Max, 2100W Max |
| Car Charge Input | 12–15V, 8.5A Max |
| Net Weight | About 50.75 kg |
| Dimensions | 633.57 x 412.52 x 426.96 mm / 659.1 x 412.52 x 426.96 mm |
| Storage Temperature | -20–60°C (-4–140°F) |
A cabin running a fridge (1.2 kWh/day), lights and router (0.5 kWh/day), pump and small appliances (1.3 kWh/day) needs about 3 kWh per day. The 4608Wh HP6000 V2 covers one full day of autonomy, and a 2,000W array brings it back to full on a clear day with margin for clouds.
Smart APP tracking shows daily solar yield and state of charge so array size can be tuned with real data. 3-year warranty, full CE / RoHS / UKCA / SAA / UL2743 / FCC / PSE certification.
Need a factory quote for the HP6000 V2? Send your target market, plug standard and order quantity — SOUOP replies within 24 hours.
