288Wh LiFePO4 Portable Power Station with 140W USB-C PD and Multi-functional DC Output for Mobile Live Streaming
| Battery Capacity: | 288Wh (19.2V / 15Ah) LiFePO4 (LFP) | Battery Type: | LiFePO4 (LFP) |
| Total Output Power: | 363W Max | USB-C1 Output: | 5/9/12/15V-3A; 20/28V-5A, 140W Max |
| USB-C2 Output (Retractable Cable): | 5/9/12/15/20V-3.25A, 65W Max | USB-C3 Output: | 5V-3A; 9V-2A; 12V-1.66A, 20W Max |
| USB-A Output: | 5V-3A; 9V-2A; 12V-1.5A, 18W Max | 12V Car Socket & DC5521 Output: | 12V / 10A, 120W Max |
| XT60 + XH2.5 Output (Multi-functional DC): | 5-30V, 0.1-5A, 100W Max | Photovoltaic Input (MPPT): | 6-24V, 5A Max, 120W Max |
| Car Charge Input (XT60): | 12V-15V, 5A Max | Total Input Power: | 260W Max |
| LED Light: | 3W LED Strip | Monitoring: | Smart APP Control |
| Size & Weight: | To Be Determined | Series: | Multi-functional DC Series |
| Application: | Live Streaming, Content Creation, Mobile Studio | Note 1: | USB-C1 And USB-C2 Are Mutually Exclusive With The Multi-functional DC Port |
| Note 2: | USB-C2 And XT60 Cannot Be Used Simultaneously | ||
| High Light: | live streaming power station,creator power supply,mobile studio battery |
||
A mobile live stream is a small broadcast studio: a camera or phone, a capture laptop, a microphone interface, a light panel, and a monitor on the ground. Every one of those is DC, and every one of them needs to stay on for the full session.
The SOUOP PB300 supports that rig with 288Wh of LiFePO4 storage and a 363W total output budget. USB-C1 at 140W carries a laptop or a USB-C PD light, the retractable 65W USB-C2 cable powers a phone or a monitor, and the XT60 port feeds 12V equipment through an adapter.
- Laptop for encoding — 55–70W, roughly 190Wh over three hours. This is the load that sets the pack size.
- Phone or camera — 10–20W, about 45Wh.
- Light panel on USB-C PD — 30–45W, about 110Wh.
- Audio interface and monitor — 15–25Wh combined.
Close to 360Wh in an ambitious rig, which is why the practical approach is sequencing: run the light panel during setup, then reduce it once the key light is balanced, and keep the laptop on the high-power port throughout.
No inverter means no cooling fan cycling in the audio background, and no mains hum on the microphone chain. For a stream recorded with an on-camera mic, that difference is audible.
- Laptop on USB-C1 first — it is the largest continuous load.
- Light panel on the multi-functional DC port through a USB-C PD adapter, or on USB-C2 if the light accepts 65W.
- Phone, monitor and audio on USB-C3, USB-A and the retractable cable.
- Remember that USB-C1 and USB-C2 are mutually exclusive with the multi-functional DC port.
The MPPT input accepts 6–24V at up to 5A, so a folding panel set up beside the tripod replaces part of the consumption during an outdoor shoot. For indoor studio work, a 260W wall recharge between sessions takes well under two hours.
| Parameter | PB300 |
|---|---|
| Capacity | 288Wh (19.2V / 15Ah) LiFePO4 (LFP) |
| Total Output Power | 363W Max |
| USB-C1 Output | 5/9/12/15V-3A; 20/28V-5A, 140W Max |
| USB-C2 Output (Retractable Cable) | 5/9/12/15/20V-3.25A, 65W Max |
| USB-C3 Output | 5V-3A; 9V-2A; 12V-1.66A, 20W Max |
| USB-A Output | 5V-3A; 9V-2A; 12V-1.5A, 18W Max |
| 12V Car Socket & DC5521 Output | 12V / 10A, 120W Max |
| XT60 + XH2.5 Output (Multi-functional DC) | 5–30V, 0.1–5A, 100W Max |
| Photovoltaic Input (MPPT) | 6–24V, 5A Max, 120W Max |
| Car Charge Input (XT60) | 12V–15V, 5A Max |
| Total Input Power | 260W Max |
| LED Light | 3W LED Strip |
| Size & Weight | To be determined |
| Certification | CE / FCC / RoHS / PSE / UN38.3 |
- Log the pack voltage in the app before going live; knowing the reserve prevents a mid-stream stop.
- Carry short cables — long runs lose more energy on PD links.
- Keep the pack off soft surfaces so airflow around the housing stays open.
SOUOP PB300 — 288Wh LiFePO4 DC power for mobile live streaming and content production rigs. OEM branding and dealer pricing available.
