288Wh LiFePO4 Portable Power Station with 120W MPPT Solar Input and 12V DC Output for Greenhouse Irrigation
| Battery Capacity: | 288Wh (19.2V / 15Ah) LiFePO4 (LFP) | Battery Type: | LiFePO4 (LFP) |
| Total Output Power: | 363W Max | USB-C1 Output: | 5/9/12/15V-3A; 20/28V-5A, 140W Max |
| USB-C2 Output (Retractable Cable): | 5/9/12/15/20V-3.25A, 65W Max | USB-C3 Output: | 5V-3A; 9V-2A; 12V-1.66A, 20W Max |
| USB-A Output: | 5V-3A; 9V-2A; 12V-1.5A, 18W Max | 12V Car Socket & DC5521 Output: | 12V / 10A, 120W Max |
| XT60 + XH2.5 Output (Multi-functional DC): | 5-30V, 0.1-5A, 100W Max | Photovoltaic Input (MPPT): | 6-24V, 5A Max, 120W Max |
| Car Charge Input (XT60): | 12V-15V, 5A Max | Total Input Power: | 260W Max |
| LED Light: | 3W LED Strip | Monitoring: | Smart APP Control |
| Size & Weight: | To Be Determined | Series: | Multi-functional DC Series |
| Application: | Greenhouse Irrigation, Ventilation, Garden Sensors | Note 1: | USB-C1 And USB-C2 Are Mutually Exclusive With The Multi-functional DC Port |
| Note 2: | USB-C2 And XT60 Cannot Be Used Simultaneously | ||
| High Light: | greenhouse power supply,12V irrigation battery,garden pump power station |
||
A polytunnel or balcony greenhouse runs on small, patient loads: a 12V irrigation pump, a timer, a fan, a sensor module, and a light strip for early mornings. None of it needs mains power, and none of it can afford a gap in the schedule.
The SOUOP PB300 supplies 288Wh of LiFePO4 storage with a 12V/10A output for pumps and fans, an adjustable 5–30V DC port for sensor modules and controllers, and a 120W MPPT solar input that recharges from a panel on the roof of the structure itself.
| Load | Draw | Daily Use |
|---|---|---|
| 12V irrigation pump | 40–60W | 20 min = 15–20Wh |
| Circulation fan | 12–18W | 6 h = 70–110Wh |
| Sensor and controller | 3–5W | 24 h = 70–120Wh |
| Light strip (seedling shelf) | 3–8W | 4 h = 15–30Wh |
A typical small setup lands between 170 and 280Wh per day, which one pack covers with a solar panel replacing most of the draw.
Pumps, fans and controllers are DC devices. Keeping the whole chain on 12V removes the inverter stage entirely, so nothing is lost in conversion and nothing needs a fan-cooled box in a humid space.
The MPPT controller accepts 6–24V at up to 5A, matching a single 100–120W panel. A day of reasonable sun returns more than the loads above.
LiFePO4 is stable across a wide temperature band. Place the unit in shade with airflow rather than in direct sun, and keep it off damp concrete.
| Parameter | PB300 |
|---|---|
| Capacity | 288Wh (19.2V / 15Ah) LiFePO4 (LFP) |
| Total Output Power | 363W Max |
| USB-C1 Output | 5/9/12/15V-3A; 20/28V-5A, 140W Max |
| USB-C2 Output (Retractable Cable) | 5/9/12/15/20V-3.25A, 65W Max |
| USB-C3 Output | 5V-3A; 9V-2A; 12V-1.66A, 20W Max |
| USB-A Output | 5V-3A; 9V-2A; 12V-1.5A, 18W Max |
| 12V Car Socket & DC5521 Output | 12V / 10A, 120W Max |
| XT60 + XH2.5 Output (Multi-functional DC) | 5–30V, 0.1–5A, 100W Max |
| Photovoltaic Input (MPPT) | 6–24V, 5A Max, 120W Max |
| Car Charge Input (XT60) | 12V–15V, 5A Max |
| Total Input Power | 260W Max |
| LED Light | 3W LED Strip |
| Size & Weight | To be determined |
| Certification | CE / FCC / RoHS / PSE / UN38.3 |
- Confirm the pump's starting current; small pumps draw a brief surge well above their rated watts.
- Keep total 12V draw below 10A.
- Route cables above the watering line and away from drip points.
SOUOP PB300 — 288Wh LiFePO4 DC storage for greenhouse irrigation, ventilation and sensor loads. Distributor and OEM enquiries welcome.
