288Wh LiFePO4 Portable Power Station with Multi-functional DC Output for Field Research and Outdoor Teaching
| Battery Capacity: | 288Wh (19.2V / 15Ah) LiFePO4 (LFP) | Battery Type: | LiFePO4 (LFP) |
| Total Output Power: | 363W Max | USB-C1 Output: | 5/9/12/15V-3A; 20/28V-5A, 140W Max |
| USB-C2 Output (Retractable Cable): | 5/9/12/15/20V-3.25A, 65W Max | USB-C3 Output: | 5V-3A; 9V-2A; 12V-1.66A, 20W Max |
| USB-A Output: | 5V-3A; 9V-2A; 12V-1.5A, 18W Max | 12V Car Socket & DC5521 Output: | 12V / 10A, 120W Max |
| XT60 + XH2.5 Output (Multi-functional DC): | 5-30V, 0.1-5A, 100W Max | Photovoltaic Input (MPPT): | 6-24V, 5A Max, 120W Max |
| Car Charge Input (XT60): | 12V-15V, 5A Max | Total Input Power: | 260W Max |
| LED Light: | 3W LED Strip | Monitoring: | Smart APP Control |
| Size & Weight: | To Be Determined | Series: | Multi-functional DC Series |
| Application: | Field Research, Survey Teams, Outdoor Teaching | Note 1: | USB-C1 And USB-C2 Are Mutually Exclusive With The Multi-functional DC Port |
| Note 2: | USB-C2 And XT60 Cannot Be Used Simultaneously | ||
| High Light: | field research power supply,survey equipment battery,outdoor teaching power |
||
Field courses and outdoor research days carry an awkward mix of equipment: data loggers on 12V, a laptop for downloading readings, cameras, tablets with survey forms, and a GPS unit that always seems to be at 20%.
The SOUOP PB300 covers that mix from a single 288Wh LiFePO4 unit. The 12V socket and the adjustable 5–30V multi-functional port supply loggers and sensors, the 140W USB-C1 handles a laptop, and the retractable 65W USB-C2 cable serves tablets and phones in the field.
Loggers and sensor modules typically draw 2–6W each. Running four of them for six hours is roughly 60–140Wh, and their 12V or 5–24V inputs map directly onto the DC outputs.
A laptop pulling readings over USB needs 45–70W for around an hour, so 50–70Wh. The high-power port keeps the session short rather than stretching battery life.
Tablets with survey forms, a phone for the field team, and the 3W LED strip once the light drops: typically under 40Wh.
Total for a full day is commonly 150–250Wh, leaving margin for an unplanned extra site.
A DC-only architecture means no inverter fan competing with acoustic recordings, no warm housing next to temperature-sensitive instruments, and no mains cable to trip over on uneven ground.
- Vehicle — the XT60 car charge input takes 12–15V at 5A, restoring a useful share during transfers.
- Solar — the MPPT input accepts 6–24V at up to 5A, so a folding panel works at a stationary site.
- Mains — 260W total input gives a fast recharge at a field station.
| Parameter | PB300 |
|---|---|
| Capacity | 288Wh (19.2V / 15Ah) LiFePO4 (LFP) |
| Total Output Power | 363W Max |
| USB-C1 Output | 5/9/12/15V-3A; 20/28V-5A, 140W Max |
| USB-C2 Output (Retractable Cable) | 5/9/12/15/20V-3.25A, 65W Max |
| USB-C3 Output | 5V-3A; 9V-2A; 12V-1.66A, 20W Max |
| USB-A Output | 5V-3A; 9V-2A; 12V-1.5A, 18W Max |
| 12V Car Socket & DC5521 Output | 12V / 10A, 120W Max |
| XT60 + XH2.5 Output (Multi-functional DC) | 5–30V, 0.1–5A, 100W Max |
| Photovoltaic Input (MPPT) | 6–24V, 5A Max, 120W Max |
| Car Charge Input (XT60) | 12V–15V, 5A Max |
| Total Input Power | 260W Max |
| LED Light | 3W LED Strip |
| Size & Weight | To be determined |
| Certification | CE / FCC / RoHS / PSE / UN38.3 |
- Label the ports used by each instrument so the setup is repeatable by any team member.
- Carry a short XT60 lead and a barrel adapter set for logger connectors.
- Keep the unit in a dry bag in wet conditions; it is an indoor-rated enclosure, not a submersible one.
SOUOP PB300 — 288Wh LiFePO4 DC power for field research, survey teams and outdoor teaching. Institutional and OEM enquiries welcome.
