LiFePO4 Portable Power Station 992Wh 10.6kg Lightweight 1200W AC Camping Ready S012

Weekend trips fail on logistics, not on enthusiasm, so S012 was sized to disappear into the boot. The 10.6kg case has a moulded handle and a 360 x 216 x 270mm footprint, which leaves room for the cooler; inside, 992Wh of LiFePO4 runs the camp kitchen, the lights and a row of phones at the same time. With 1200W on tap and 3600W of peak, a portable induction plate or a kettle is not a problem, and the fans stay quiet enough to sleep beside.

A camping companion that earns its space

1. Lift it, don't lug it. At 10.6kg it is light enough for one person to move from boot to picnic table, and small enough to sit under the fold-out table once the camp is set.

2. Cook without gas. 1200W rated output with 3600W peak runs an induction plate, a kettle or a coffee machine, so hot food stops depending on a gas canister.

3. Keep the devices alive. Two USB-C and two USB-A ports charge phones, action cameras, drones and head torches in parallel, which is the real bottleneck on a two night trip.

4. Recharge without a socket. A 240W folding panel refills the pack in about four hours of good sun, and the 12V car socket adds charge on the drive between stops.

5. Quiet and clean. No exhaust and no engine noise means it can run under an awning or inside a tent vestibule, at sites that refuse fuel generators.

S012 leaves the factory in a colour box with an export carton, backed by a 3 year warranty, with OEM branding available for outdoor and RV retailers.

Factory and quality behind every S012

SOUOP has built portable energy storage in Shenzhen since 2008, running its own battery pack, BMS and inverter assembly lines with a team of between 101 and 500 people. Around 80 to 90 percent of output leaves for Europe and North America, and every unit is charged, discharged and insulation tested before it is boxed.

The factory works to ISO 9001 quality management and BSCI social compliance standards, and the S012 line carries CE and RoHS certification with a traceable serial number on each battery pack. Test reports for a production batch are available to distributors on request.

Because pack, inverter and enclosure are engineered under one roof, socket standards, cabinet colour, logo printing and app branding can all be adapted on OEM and ODM orders, typically within 7 to 15 working days after payment.

Certificates held by our factory: BCTC test report, CQC / IQNET quality system, CE and RoHS compliance.